A retrospective study evaluating the influence of Class III correction appliances on the sagittal pharyngeal airway dimension.

The aim of this study was to compare the effects of Class III correction appliances including the Facemask (FM), and the new non-compliance fixed functional appliances such as the Reversed Forsus Fatigue Resistant Device (FRD), as well as the CS-2000 (CS), on the sagittal pharyngeal airway dimension (SPAD). Pre-treatment and post-treatment lateral cephalograms of 45 patients who underwent Class III appliance treatment, using either FM, Reversed FRD, or CS were collected from the files of treated patients. SPAD changes were evaluated in each group, and comparisons were conducted between the three study groups. Additionally, sagittal and vertical skeletal measurements were conducted. The FM, the Reversed FRD, and the CS, were found to generate a significant increase in the SPAD, with the Reversed FRD contributing to the most significant change at the OPAA (116.80 ± 26.36 mm2). All three appliances elicited significant antero-posterior changes in the SNA°, SNB°, and ANB°, also with the greatest intermaxillary change documented with the employment of the Reversed FRD (ANB° = 3.33 ± 0.82°). As for the vertical dimension, the FM, the Reversed FRD, and the CS elicited significant FMA° increases, with the greatest change attributed to the FM (FMA° = 2.32 ± 0.97°). Therefore, the three tested Class III corrective appliances generated significant SPAD, antero-posterior, and vertical changes. However, the Revered FRD showed a superior impact in increasing the SPAD at the OPAA level and in eliciting significant intermaxillary changes.

Comparison of Twin Block appliance and Herbst appliance in the treatment of Class II malocclusion among children: a meta-analysis.

BACKGROUND: Our meta-analysis aimed to evaluate the efficacy of applying Herbst and Twin Block appliances in the treatment of Class II malocclusion among children. METHODS: Databases, including PubMed, Embase, Cochrane Library, Web of Science, China National Knowledge Infrastructure (CNKI), China VIP Database (VIP), and Wanfang were thoroughly searched from inception to August 9, 2023. The outcomes included skeletal, dental, and soft tissue changes. The weighted mean difference (WMD) was used as the effect indicator, and the effect size was expressed with a 95% confidence interval (CI). The heterogeneity of each outcome effect size was tested, and the heterogeneity statistic I2 ≥ 50% was analyzed by the random-effect model, otherwise, the fixed-effect model was conducted. Sensitivity analysis was performed. RESULTS: A total of 12 studies involving 574 patients were included in this meta-analysis. Herbst appliance had a statistically significant increase in mandibular body length (WMD: 1.44, 95% CI: 0.93 to 1.96, P < 0.001) compared with the Twin Block appliance. More increases in angle and distance of L1 to mandibular plane (MP) were found in the Herbst appliance compared with the Twin Block appliance. Significant and greater improvements in molar relationship (WMD: 0.79, 95% CI: 0.28 to 1.29, P = 0.002), posterior facial height (WMD: -1.23, 95% CI: -2.08 to -0.38, P = 0.005), convexity angle (WMD: -1.89, 95% CI: -3.12 to -0.66, P = 0.003), and Sella-Nasion plane angle (U1 to SN) (WMD: 3.34, 95% CI: 2.25 to 4.43, P < 0.001) were achieved in the Twin Block appliance. Herbst and Twin Block appliances produced similar effects in the skeletal and dentoalveolar changes including Sella-Nasion-point A (SNA), Sella-Nasion-point B, point A-Nasion-point B (ANB), overjet, and overbite. CONCLUSION: As the findings revealed both Herbst and Twin Block appliances contributed successfully to the correction of Class II malocclusion. Compared with the Twin Block appliance, the Herbst appliance may have more advantages in mandibular bone movement. Twin Block therapy resulted in more improvement in the aesthetics of the face.

Impact of initial lip competence on the outcome of class II functional appliances therapy.

OBJECTIVES: The aim of this prospective clinical study was to evaluate the impact of initial lip position on class II functional appliance therapy. MATERIALS AND METHODS: In total, 34 class II division 1 patients (23 females, 19 males; mean age 12.4 ± 0.9 years) that met the inclusion criteria (> ½ class II molar relationship, overjet > 6 mm, ANB > 4°, neutral or horizontal growth pattern, cervical vertebral maturation stage (CVMS) II - III, mean wear-time > 10 h/day) were consecutively divided into two groups (lip incompetence (LI); lip competence (LC)). All patients were treated with the Sander bite jumping appliance (BJA). Wear time was microelectronically measured. Lateral cephalograms were taken at the beginning (T0) and after 1 year of treatment (T1). An untreated class II group served as a control (CG). Inter-group comparisons were determined with Mann-Whitney U tests for independent samples. RESULTS: Significant skeletal treatment effects were found in both treated groups when compared to the CG with significantly more pronounced mandibular skeletal effects in the LI than in the LC group (mandibular base length p < 0.001, composite mandibular base length p < 0.001, condylar head growth p = 0.002, co-pg p < 0.00, go-pg p = 0.003, reduction of the ANB angle p = 0.009, and Wits appraisal p < 0.001). CONCLUSION: The more pronounced mandibular effects in the LI group were composed of the functional orthopedic effect plus harmonization of the lip competence. CLINICAL RELEVANCE: Functional harmonization of lip incompetence with BJA enhances mandibular growth stimulation. Lip incompetence seems to impede mandibular growth and its harmonization seems to be a preventive approach.

Evaluation of the antibacterial effect of titanium dioxide nanoparticles combined with acrylic laminates for functional orthodontic appliances: a randomized controlled clinical trial.

BACKGROUND: The objective of this study was to evaluate the antibacterial effect of titanium dioxide nanoparticles incorporated into the acrylic baseplates of the maxillary part of twin block appliances in orthodontic patients during the treatment period. MATERIALS AND METHODS: Twenty-six patients were selected randomly and divided into two groups(n = 13). Test group patients used orthodontic functional appliances containing 1% titanium dioxide nanoparticles in acrylic baseplates. Control group patients used orthodontic functional appliances without titanium dioxide nanoparticles in acrylic baseplates. Swap samples were taken from the palatal gingiva facing the fitting surface of the acrylic component of the maxillary part of a twin block appliance for each patient at five-time intervals (baseline sample, after one, two, four, and six months) and then cultured in blood agar plates to calculate bacterial colony count. The Mann‒Whitney U test and the Friedman test were used to compare data. Bonferroni correction (p value ≤ 0.05) was applied to detect significant differences. THE RESULTS: showed a decrease in the bacterial colony count in the test group compared to the control group. Pairwise comparisons revealed a statistically significant difference in samples after four- and six-month groups (p values = 0.002 and 0.011, respectively) vs. the one-month test group. A higher statistically significant difference was observed in the six-month group (p-value = 0.037) vs. the baseline group in the control group. CONCLUSION: The addition of 1% titanium dioxide nanoparticles to acrylic baseplates of orthodontic functional appliances significantly reduced the bacterial colony count under the base plate after at least four months of application.

Prevalence of temporomandibular disorders diagnosis in patients treated with Herbst appliance: a systematic review and meta-analysis.

BACKGROUND: The Herbst appliance is an excellent therapy for treating class II malocclusions with increased overjet. Its mechanics involve propelling the mandibular bone using two pistons the patient cannot remove. The so-called bite-jumping keeps the mandible in a more anterior position for a variable period, usually at least 6 months. This appliance does not inhibit joint functions and movements, although there are scientific papers in the literature investigating whether this appliance can lead to temporomandibular disorders. This systematic review aims to evaluate whether Herbst's device can cause temporomandibular diseases by assessing the presence of TMD in patients before and after treatment. METHODS: A literature search up to 3 May 2023 was carried out on three online databases: PubMed, Scopus and Web of Science. Only studies that evaluated patients with Helkimo scores and Manual functional analysis were considered, as studies that assessed the difference in TMD before and after Herbst therapy. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the odds ratio (OR) between the two groups (pre and post-Herbst). RESULTS: The included papers in this review were 60. Fifty-seven were excluded. In addition, a manual search was performed. After the search phase, four articles were considered in the study, one of which was found through a manual search. The overall effect showed that there was no difference in TMD prevalence between pre-Herbst and post-Herbst therapy (OR 0.74; 95% CI: 0.33-1.68). CONCLUSION: Herbst appliance seems not to lead to an increase in the incidence of TMD in treated patients; on the contrary, it appears to decrease it. Further studies are needed to assess the possible influence of Herbst on TMDs.

The skeletal and dental effects of Hanks Herbst versus twin block appliances for class II correction in growing patients: a randomized clinical trial.

BACKGROUND: Despite the popularity of the Twin Block (TB) and the Hanks Herbst (HH) functional appliances, there is limited prospective research comparing these removable and fixed designs, respectively. OBJECTIVES: To evaluate and compare the skeletal and dental effects associated with TB and HH functional appliances as well as to detect factors that might influence the success or failure of treatment in adolescents with Class II malocclusion. DESIGN AND SETTING: A parallel-group randomized controlled trial was undertaken in a single-centre hospital in the United Kingdom. METHODS: A total of 80 participants (aged 10-14 years) with overjet of 7 mm or more were randomized to receive either the HH or TB appliance. Cephalometric radiographs were collected at the start of the study and immediately after the withdrawal of the functional appliances and measured using Pancherz analysis. Participants were allocated to the TB or HH group, based on an electronic randomization, stratified for gender and allocation concealed. Blinding to the allocated arm was not possible. However, all data were coded and anonymized to ensure that assessors were blinded to the group allocation. The main outcome was the anterior-posterior skeletal and dento-alveolar changes at the end of the functional phase. RESULTS: Fifteen (37.5%) participants from the TB group and 7 (15.5%) from HH failed to achieve full overjet reduction (<4 mm) after 12 months of treatment. Overjet reduction was 2 mm greater with HH compared to TB (P = .05; 95% CI: 0.2, 3.2). No significant differences regarding skeletal and dental changes were reported, with the exception that participants in HH group experienced greater lower molar protraction (P = .002; 95% CI: -2.8, -0.8) and mandibular incisors advancement (P = .001; 95% CI: -2.9, -1), indicating greater dental than skeletal effects. CONCLUSION: The TB appliance was associated with a higher rate of treatment discontinuation. No significant clinical differences were observed in the skeletal and dental effects, although the HH may be associated with more pronounced effects on the mandibular dentition. CLINICAL TRIAL REGISTRATION: The protocol was registered online before the start of the trial (ISRCTN11717011).

Effect of functional appliances on sleep-disordered breathing in Class II division 1 malocclusion children: Randomized controlled trial.

OBJECTIVES: A randomized controlled trial was undertaken to investigate the orthopaedic effect of functional appliances on the pharyngeal airway space and nocturnal breathing of children with skeletal class II due to mandibular retrusion. MATERIALS AND METHODS: Forty patients were randomized into a 1:1 ratio study (Twin block) group and a control (fixed appliance) group. Each group included equal numbers of boys and girls. Diagnosis with sleep-disordered breathing was not an inclusion criterion. The duration of the trial was 12 months (T0 - T12). Eligibility criteria included skeletal Class II division 1 malocclusion with mandibular retrognathism, SNA ≥82, SNB ≤78, ANB ≥4, overjet ≥6 mm, and patients in circumpubertal stage CVM2 and CVM3. The main outcomes were pharyngeal airway volume, oxygen desaturation index (ODI), and maximum expiratory pressure (MEP), while the secondary outcomes were skeletal and dental changes of the maxilla and mandible. Randomization was accomplished with random blocks of 20 patients with allocation concealed in sequentially numbered, opaque, and sealed envelopes. Blinding was only applicable for data analysis of radiographic measurements and data extracted from the pulse oximeter. RESULTS: The mean age of the patients was 10 ± 1.5 and 10 ± 1.2 at (T0) for the Twin Block and the control groups, respectively. The changes in the oropharyngeal (2.66 cc and 0.056; P = .03) and nasopharyngeal (1.3 cc and 0.84; P = .053) airway volumes for the Twin block and control groups, respectively, were significantly different for the oropharynx. There was a significant decrease in ODI by [median -3.55 (-5.05 to 0.50); P ≤ .001] and a significant increase [median 45 (0.0-110); P ≤ .001] in MEP for the Twin block group. A significant inverse correlation (r = -.589; P = .006) could be found between the total volume of the oropharynx and ODI. No serious harm was observed. CONCLUSIONS: The Twin block group showed significant change in oropharyngeal airway volume and improvement of nocturnal breathing. REGISTRATION: This trial was registered at https://www. CLINICALTRIALS: gov, registration number NCT04255511.

A comparison of skeletal and dental changes in patients with a Class II relationship treated with clear aligner mandibular advancement and Herbst appliance followed by comprehensive orthodontic treatment.

INTRODUCTION: The objective of this study was to compare the skeletal and dental changes of patients with a Class II relationship treated with clear aligner mandibular advancement (MA) and Herbst appliances followed by comprehensive orthodontic treatment. METHODS: The participants included 20 patients treated with MA and 20 with the Herbst appliance. Orthodontic records were taken before treatment, after the functional appliance, and completion of phase II treatment. The skeletal and dental changes across the 3-time periods were evaluated using a matched paired t test for each treatment. A 2-sample t test was used to examine the changes across periods between 2 treatment groups (P <0.05). RESULTS: Significant reduction in overjet, overbite, and change in molar relationship were obtained by both appliances with similar skeletal and dental contributions. This was contributed by a forward movement of the mandible and mandibular molars, backward movement of the maxillary molars, and retraction of the maxillary incisors. After phase II treatment, both appliances could maintain the skeletal and dental changes achieved during the advancement phase. Greater change in overbite (2.4 mm vs 1.4 mm), an eruption of maxillary incisors (0.9 mm vs 0.1 mm), and proclination of mandibular incisors were found with the Herbst group (3.9° vs -2.1°). The average total treatment time was similar with the 2 appliances. CONCLUSIONS: Both functional appliances were equally effective in reducing the overjet and overbite and achieving a Class I molar relationship with a similar length of treatment time. The Herbst design lacked control of the mandibular incisor proclination, and clear aligners offered better vertical control and management of the mandibular incisor inclination.

Comparisons of soft tissue changes after Herbst appliance treatment in three different growth phases.

BACKGROUND: This study aimed to compare the soft tissue effects of Herbst appliance in Class II malocclusion patients treated in three different craniofacial growth phases: prepubertal (PRE), circumpubertal (CIR), and postpubertal (POS). METHODS: In total, 95 patients with Class II Division 1 malocclusion previously treated with a Herbst appliance were analyzed. Through the cervical vertebral maturation stages method, patients were allocated into three groups depending on the growth craniofacial phase at the beginning of treatment: PRE, CIR, and POS. Seventeen cephalometric measures were evaluated from each lateral radiograph before and after Herbst therapy using the Radiocef 2 software (Radio Memory, Belo Horizonte). Intragroup and intergroup treatment changes were compared statistically using a paired t test and MANOVA test, respectively. RESULTS: Soft tissue thickness changes were related only to mandible; all three mandibular measurements (L1_LL, B_B', and Pog_Pog') showed thickening for the PRE group ranging from 0.92 mm (Pog_Pog') to 2.02 mm (B_B'), and only lower lip thickened overtime for the POS group (L1_LL = 0.99 mm). Soft and hard tissue pogonion displaced anteriorly, but only the soft tissue showed differences among groups; PRE group presented more anterior displacement than POS group (3.61 mm and 1.39 mm, respectively). Hard and soft tissue facial convexity decreased more in the PRE and CIR groups than in the POS group. Mentolabial sulcus depth reduced more in the PRE (1.07 mm) and CIR (1.29 mm) groups than in the POS (0.55 mm) group. Horizontal movement of the skeletal and soft pogonion presented a moderate-high positive correlation (r = 0.783), and hard and soft facial convexity showed a moderate-low positive correlation (r = 0.403). CONCLUSIONS: Herbst appliance therapy produces soft tissue improvements in the three phases of craniofacial growth, being greater in patients in the PRE and CIR phases.

Cephalometric changes in pharyngeal airway dimensions after functional treatment with twin block versus myobrace appliances in developing skeletal class II patients: a randomized clinical trial.

BACKGROUND: Several appliances have been used for correction of developing skeletal Class II, including different myofunctional appliances as Twin block (TB)as well as the new pre-fabricated Myobrace (MB) appliance. However, the effects of these devices on the pharyngeal airways have not been compared in the literature. Thus, the aim of this study was to compare the effects of two Class II correction appliances; TB and MB on the sagittal pharyngeal airway dimension (SPAD), including the nasopharyngeal airway area (NPAA), the oropharyngeal airway area (OPAA), and the laryngopharyngeal airway area (LPAA). METHODS: This is a two parallel arms randomized comparative clinical trial. Twenty-six children of 9-12 years with Skeletal Class II malocclusion due to mandibular deficiency and normal maxillary growth as confirmed by lateral cephalometric X-ray readings (ANB angle > 4° and SNB angle < 78) and Cervical vertebral maturational index (CVMI) 1 or 2 were randomly assigned into two equal groups. Group I: TB, Group II: MB (prefabricated functional appliance, Myofunctional Research Co., Australia). Lateral cephalograms were taken for all patients in both groups before treatment (T1) and after treatment (6 months later) (T2). The primary aim was to assess pre and post treatment changes in the SPAD in each group, and compare between the two study groups. The secondary aim was to evaluate the sagittal skeletal measurements such as the SNA, SNB, ANB, Wits appraisal, as well as vertical skeletal measurements represented by the Frankfurt-mandibular plane angle (FMA) measured pre- and post-treatment. The independent samples t-test was used to compare the two study groups, and the mean difference and 95% confidence intervals (CI) were computed. The paired samples t-test was used to compare various parameters between T1 and T2 within each group. The cutoff for significance was p-value < 0.05. Data were analyzed using IBM SPSS for Windows (Version 26.0). RESULTS: By Comparing changes in airway measurements within each group, it was found that NPAA, OPAA, and LPAA increased significantly after treatment within each group of MB and TB. TB group showed significantly higher mean difference (T2-T1) in both NPAA and OPAA than MB group with 28.39 (± 56.75) and 40.46 (± 52.16) respectively. The increase in LPAA values was not statistically significant at (T2-T1) between both groups. Regarding skeletal changes, there was a significant increase in the SNB values between T1 and T2 within each group with 2.82 (± 3.32) for MB group and 3.79 (± 3.06) for TB group Moreover, there was a significant decrease in the ANB values between T1 and T2 within each group by 2.42 (± 2.70) for MB group and 3.06 (± 1.14) for TB group. Similarly, there was a significant decrease in the ANB values between T1 and T2 within each group by -2.13 (± 0.62) for MB group and - 2.46 (± 0.72) for TB group. No significant differences were found between both groups in SNA, SNB, ANB and Wits appraisal at p = 0.06, p = 0.45, p = 0.43 and p = 0.22 respectively. FMA did not show significant difference between T1 and T2 within each group, nor showed a significant mean difference between both groups at T2-T1. CONCLUSIONS: TB was more effective than MB in improving the upper (NPAA) and middle (OPAA) airways, while no difference was found regarding the lower airway (LPAA). Both TB and MB reduced the severity of developing skeletal class II due to mandibular retrognathism by forward posturing of the mandible. Thus, patients with airway problems would benefit more from TB than MB.

Effects of Twin-Block with an expanding device on the upper airway in growing children with skeletal class II malocclusion-a retrospective study based on the consistency of three-dimensional and two-dimensional data.

OBJECTIVES: Skeletal class II malocclusion is one of the most common malocclusions. Among the functional appliances for skeletal class II malocclusion, the Twin-Block appliance with a maxillary expander is effective in repositioning the mandible forward. In this study, we focused our efforts on investigating the effects of Twin-Block appliances with maxillary expanders on the upper airway in growing children with skeletal class II malocclusion by tracing and measuring lateral cephalograms after evaluating the consistency of three-dimensional CBCT data and two-dimensional lateral cephalogram data. MATERIALS AND METHODS: A total of 102 patients ranging from 9 to 15 years old (11.37 ± 2.80, male/female ratio = 1:1) with skeletal class II malocclusion were selected to evaluate the consistency of CBCT data and lateral cephalogram data. The strongly and moderately correlated segments were then selected to study the effects of Twin-Block with a maxillary expander on the upper airway in 66 growing children with skeletal class II malocclusion (11.31 ± 1.23 years old, male/female ratio = 1:1) by lateral cephalograms. RESULTS: The results showed a strong significant correlation in the nasopharynx (r = 0.708) and moderate significant correlations in the overall upper airway (r = 0.641), palatopharynx (r = 0.553), and glossopharynx (r = 0.575) but a weak correlation in the hypopharynx (r = 0.323). The corresponding determination coefficient (R2) was also determined by scatter plot analysis. Moreover, compared with the pretreatment data (T1), the total area of the upper airway and the areas of the nasopharynx, palatopharynx, and glossopharynx after functional treatment (T2) increased statistically and significantly. CONCLUSIONS: Lateral cephalograms can reflect the volume of the nasopharynx and oropharynx in skeletal class II children to a certain extent, while Twin-Block appliances with maxillary expanders can widen the volume of the nasopharynx and oropharynx significantly. CLINICAL RELEVANCE: The lateral cephalogram is reliable for analyzing the nasopharynx, palatopharynx, and glossopharynx in orthodontic clinical practice. Twin-Block appliances with maxillary expanders have a positive effect on skeletal class II patients with airway stenosis.

Two-phase orthodontic treatment of a patient with a low-angle skeletal class II malocclusion: a 7-year follow-up.

Low-angle skeletal class II malocclusions are often observed with sagittal and vertical developmental abnormalities of the mandible. Two-phase orthodontic treatment of functional orthopedic therapy combined with fixed correction is one of the most common methods to treat of skeletal class II malocclusions. This case report describes the two-phase orthodontic treatment of a patient with severe low-angle skeletal class II malocclusion. A Twin Block orthodontic appliance was used to improve mandibular growth, and the adjustment of the occlusal relationship using a fixed appliance after functional therapy. After treatment, a significant improvement was observed in the patient's facial appearance and occlusal relationship. Additionally, a 7-year follow-up confirmed the stability of the treatment results. Although a vertical facial growth direction is difficult to control, the Twin Block orthodontic appliance in adolescents might effectively improve the difference in the sagittal growth of the mandible. Whilst the growth pattern could not be fully controlled, the treatment significantly improved the patient's facial profile and occlusion.

Efficacy of a modified twin block appliance compared with the traditional twin block appliance in children with hyperdivergent mandibular retrognathia: protocol for a single-centre, single-blind, randomised controlled trial.

INTRODUCTION: Compensatory mouth breathing, caused by nasopharyngeal obstructive diseases, is the main cause of hyperdivergent mandibular retrognathia in children. Such deformities require effective growth guidance before pubertal growth peaks. The traditional mandibular advancement device, twin block (TB), can guide the forward development of the mandible. However, the side effect of increasing the vertical dimension of the lower facial third, worsens the facial profile of children with divergent growth trends. To solve this problem, a modified TB (LLTB) appliance was designed to control the vertical dimension by intruding incisors and inhibiting the elongation of posterior teeth during the advancement of the mandible, which could avoid the side effects of traditional appliances and effectively guide the growth of the mandible in a normal direction. METHODS AND ANALYSIS: The study was designed as a single-centre, single-blind, randomised, parallel controlled trial. We aim to enrol 60 children aged 9-14 years with hyperdivergent skeletal class II malocclusion, using a 1:1 allocation ratio. The participants were will be randomly assigned to receive either the TB or LLTB treatment. The primary outcome will be a change in the angle of the mandibular plane relative to the anterior cranial base. The secondary outcomes will include changes in the sagittal maxillomandibular relation, occlusal plane, facial height, morphology of the mandible and upper airway width. Safety endpoints will also be evaluated. ETHICS AND DISSEMINATION: Ethical approval was obtained from the ethics committee of Shanghai Stomatological Hospital. Both participants and their guardians will be fully informed of the study and sign an informed consent form before participating in the trial. The results will be publicly available in peer-reviewed scientific journals. TRIAL REGISTRATION NUMBER: ChiCTR2000035882.

Three-dimensional Evaluation of the Carriere Motion 3D Appliance in the treatment of Class II malocclusion.

INTRODUCTION: This study aimed to quantify the outcomes of adolescent patients with Class II malocclusion treated with the Carriere Motion 3D Appliance (CMA) combined with full fixed appliances. METHODS: Cone-beam computed tomography scans of 22 patients were available before orthodontic treatment (T1), at removal of the CMA (T2), and posttreatment (T3). The average age of the patients was 13.5 ± 1.6 years at T1, 14.1 ± 0.2 years at T2, and 15.6 ± 0.5 years at T3. The 3-dimensional image analysis procedures were performed using ITK-SNAP (version 3.6.0; www.itksnap.org, Hatfield, Pa) and SlicerCMF (version 4.11.0; http://www.slicer.org, Cambridge, Mass); skeletal and dentoalveolar changes relative to cranial base, maxillary, and mandibular regional superimpositions were evaluated. RESULTS: Changes were analyzed with 1 sample t tests using the mean differences during the CMA phase (T1 to T2) and total treatment time (T1 to T3). Significant skeletal changes included a slight reduction of ANB from T1 to T3, mandibular growth (Co-Gn increment of 1.2 mm and 3.3 mm from T1 to T2 and T1 to T3, respectively), inferior displacement of point A, and anterior and inferior displacement of point B. The mandibular plane did not change significantly during treatment. During the CMA treatment, posterior tipping and distal rotation of the maxillary molars, tip back and inferior displacement of the maxillary canines, significant mesial rotation, and superior displacement of the mandibular molars were observed. These movements rebounded during the full fixed appliance phase except for the molar and canine vertical displacements. Clinically significant dental changes during treatment included a reduction in overjet and overbite, Class II correction of the molar and canine relationship, and proclination of the mandibular incisors. CONCLUSIONS: The CMA is an effective treatment modality for Class II correction in growing patients because of a combination of mesial movement of the mandibular molar, distal rotation of the maxillary molar, and anterior displacement of the mandible.

Comparison of masticatory myofunctional rehabilitation combined with conventional functional appliances for the treatment of class â ¡, division 1 malocclusion. A retrospective cohort study.

OBJECTIVE: To estimate the clinical efficacy of early masticatory myofunction rehabilitation combined with conventional functional appliances for the treatment of class Ⅱ, division 1 malocclusion in orthodontic children during the growing phase. MATERIALS AND METHOD: A comparative retrospective cohort study, enrolled patients diagnosed with class Ⅱ/1 in the stage of late mixed or early permanent dentition. Patients were divided into a TBA group (Cohort 1): receiving Twin-block appliance treatment; and a MMR group (Cohort 2): receiving either early masticatory myofunction rehabilitation as adjunctive therapy combined with the same conventional functional appliances. The study variables were active (Phase 1) treatment duration, oral esthetic subjective impact score (OASIS), several cephalometric indices calculated from X-ray photographs, the maximum voltage (mV) and asymmetry index (AsI) of anterior temporalis (TA) and masseter muscles (MM) before and after treatment. Complications were also recorded. RESULTS: A total of 424 cases were enrolled. The mean treatment duration in the MMR group was 168.33 days (SD: 25.43) and 215.00 days (SD: 28.81) in the TBA group; mean difference: -46.67 days (95% CI: [-81.62, -11.71]), P<0.001. For the OASIS outcome measure, there was no statistically significant difference between the mean total scores for the MMR group (18.83±7.73) or TBA group (17.67±6.47) groups adjusted to include pre-treatment OASIS scores (P = 0.783). After treatment, sella-nasion-B point (SNB), mandibular incisor angle, maxillary base and mandibular base in both two groups were significantly increased, while AB plane angle (ANB), maxillary incisor angle, overjet and overbite were significantly decreased. The mV and AsI of TA and MM were also improved following treatment. However, no significant differences were observed between two groups. CONCLUSION: Our results confirmed that early masticatory myofunction rehabilitation in combination with conventional TBA for patients in the growing phase was significantly effective in the management of class Ⅱ/1 in orthodontic treatment, which could significantly shorten the treatment duration and had the similar improvement in the cephalometry data, OASIS scores and masticatory muscles function when comparing to conventional TBA alone.

The use of the Hanks Herbst vs Twin-block in Class II malocclusion: A randomized controlled trial.

INTRODUCTION: This 2-arm parallel study aimed to compare and evaluate the efficiency of Hanks Herbst (HH) and Twin-block (TB) functional appliances in treating adolescents with Class II malocclusion. METHODS: A parallel-group randomized controlled trial was undertaken in a single United Kingdom hospital. Eighty participants were recruited and randomized in a 1:1 ratio to receive either the HH or TB appliance. Eligibility criteria included children aged 10-14 years with an overjet of ≥7 mm without dental anomalies. The primary outcome was the time (in months) required to reduce overjet to normal limits (<4 mm). Secondary outcomes included treatment failure rates, complications and their impact on oral health-related quality of life (OHRQOL). Randomization was accomplished using electronic software with allocation concealed using sequentially numbered, opaque, and sealed envelopes. Blinding was only applicable for outcome assessment. Data were analyzed using descriptive statistics and regression analyses to detect between-group differences, including Cox regression for time to treatment success. RESULTS: HH was significantly faster than TB in reducing the overjet to within normal limits (95% confidence interval [CI], -3.00 to -0.03; P = 0.046). Mean overjet reduction was more efficient with the HH than the TB appliance (ß = 1.3; 95% CI, 0.04-2.40; P = 0.04). Fifteen (37.5%) of the participants in the TB group and 7 (17.5%) in the HH group failed to complete the treatment (hazard ratio = 0.54; 95% CI, 0.32-0.91, P = 0.02). However, TB was associated with fewer routine (incidence rate ratio = 0.81; 95% CI, 0.7-0.9; P = 0.004) and emergency (incidence rate ratio = 0.1; 95% CI, 0.1-0.3; P = 0.001) visits. Chairside time was greater with the HH (ß = 2.7; 95% CI, 1.8-3.6, P = 0.001). Participants in both groups experienced complications with similar frequency. A greater deterioration in OHRQOL was found during treatment with the TB. CONCLUSIONS: Treatment with HH resulted in more efficient and predictable overjet reduction than TB. More treatment discontinuation and greater deterioration in OHRQOL were observed with the TB. However, HH was associated with more routine and emergency visits. REGISTRATION: ISRCTN11717011. PROTOCOL: The protocol was not published before trial commencement. FUNDING: No specific external or internal funding was provided. Treatment for participants was provided as part of routine orthodontic treatment in the hospital.

Meta-analysis of condylar changes produced by a Twin-block appliance in Class â ¡ malocclusion.

OBJECTIVES: To evaluate the effects of a Twin-block appliance on the condyles of patients with ClassⅡmalocclusion by conducting a systematic review and a Meta-analysis. METHODS: Pubmed, Embase, Cochrane Library, Chinese BioMedical Literature Database, China National Knowledge Infrastructure, and VIP Database were electronically searched. Randomized controlled trials, controlled clinical trials, and single-arm trials on condylar changes produced by a Twin-block appliance in patients with ClassⅡmalocclusion were included. Two reviewers independently extracted and assessed the risk of bias. Meta-analyses were conducted with Review Manager 5.3. RESULTS: Eight studies were included; among which, seven were of high quality. After treatment with a twin block appliance, condyles moved anteriorly. The anterior joint spaces decreased (P<0.000 01), whereas the posterior spaces increased (P<0.000 01). The superior spaces were not changed (P=0.11). Moreover, a significant difference was observed in the increase of the condylar space index (P<0.000 01). After treatment, the anteroposterior diameters of the condyles and condylar height increased (P=0.000 2 and P<0.000 01, respectively). By contrast, no significant changes were discovered in the medial external diameters of the condyles (P=0.42). CONCLUSIONS: A Twin-block appliance can promote the growth of a condyle in the posterior and upper direction and move it forward in favor of the correction of Class Ⅱ malocclusion.

Treatment effects of Herbst appliance in skeletal Class II cases during pre-pubertal and post-pubertal periods: a cone-beam computed tomographic study.

In the present study, Thirty-six Class patients II (A condition in which the upper jaw is larger than the lower jaw) were randomly selected and assigned to one of two groups based on their maturation stage: the pre-pubertal group (18 patients, mean age 9.15 ± 1.5 years) and post-pubertal group (18 patients, mean age 16.3 ± 1.0 years). All patients were treated with a metallic splint-supported Herbst IV appliance (An appliance that acts like artificial joint working between the upper and power jaws that keeps the lower jaw in a forward position, thus improving the Class II condition). Pretreatment (T1) and post-Herbst IV treatment (T2) scans were obtained for both groups. Dental and skeletal measurements were made on the scans and statistically analyzed using paired and independent t-tests. The study hypothesis was that; the dentoskeletal changes in Class II malocclusion treatment using Herbst appliance in the Pre-pubertal is more than the Post-pubertal growth stage due to the remaining growth potential for the pre-pubertal patients. The comparison between the two groups revealed statistically significant differences in horizontal skeletal parameters in the lower jaw only, while other readings were similar.